Ac infinity AI controller question
-
CreatorDiscussion
-

scrog_it23ParticipantJanuary 24, 2025 at 1:09 pmI heard that with the new AC infinity AI controller you can use it to control other light brands with an adapter. I just preordered the controller but I wondering if anyone knew off hand which adapter I would need to get in order to hook it up to the Mars Hydro FC 3000-EVO.
0 -
CreatorDiscussion
-
Edit: after looking up the light model, you need the RJ11/12 type A adapter. – https://acinfinity.com/hydroponics-growers/uis-lighting-adapter-type-a-for-rj11-12-connector-lights-with-pwm-or-0-10v-dimmers/
There are no UIS connectors on some off brand equipment (to control brightness) but you can control the power, turning the light on and off with the adapter plug. You’ll need to manually adjust the brightness on the light fixture.
https://acinfinity.com/hydroponics-growers/uis-control-plug-for-outlet-powered-equipment/
-
This reply was modified 10 months, 3 weeks ago by
jmystro.
-
This reply was modified 10 months, 3 weeks ago by
jmystro.
0 -
This reply was modified 10 months, 3 weeks ago by
-
I have one of these for the majority. Off/On when you want, set a schedule for timers and even see how much electricity the thing uses per hour, day etc. per plug.
One of the best purchases I made.
0 -
AC Infinity does have adapters for certain lights (see AC Infinity’s website), and some other lighting brands do now support UIS. You’d need to check with your vendor, otherwise it’s the on/off switch @jmystro linked above.
0 -
I use the adapters to run spider farmer bar and board lights. as others have said search aci’s website and see which one you need. for spider farmer its the type “b” adapter. their 14.99 on Amazon and you should be able to use dude15 for a small discount. I run a few of them and they are great!
0 -
I ordered a couple of the type “b” on amazon today, 14.99 – 15% coupon + “mrgrowit15” discount code and with tax 12 bucks each.
0 -
Hi just have a look on your LED Driver and follow this ;)
FC, FC-E, SP, and TS Series Models with Self-Branded drivers can use Type-A Adapter
and Type-B adapter if your model has a MOSO or MEANWELL driver.
My Mars Hydro FC 1500 evo has a self-branded one and it´s working fine with Type-A
0
Log in to reply.
