-
With the arrival and set up of the new 4×4, I decided to turn the 2×2 into a propagation chamber. I tried cloning before with no success, but want to get up to speed for when these two Strawberry Cough I just topped get a bit bigger, so I can play Johnny Appleseed with a few.
three in coco and worm castings with a sprinkle of Recharge and Dots…
eazeandlax, vancerefridgeration and 5 others-
I like coco better, perlite doesn’t hold enough moisture, those coco coins are good. Its that air moisture ratio, damp, not wet. Low, low lighr, like real low or they try and grow and die, 80%. 75 F. Did I mention light? LEDs we typically use are too bright, i used to use burned out florescence lights and now a 10watt bar 24 inches…
3- View 3 replies
-
I wholeheartedly agree with @moistcube. One thing is the temp can go up to 80 if you have the humidity at 80 as well. Mine seem to root quicker a few degrees warmer.
If you use Clonex gel, it will help speed up the rooting.
2- View 2 replies
-
3.5 PPFD. Measured it with the PAR meter
1 -
In almost the same situation here. I decided to go the aero cloner route and built one out of a 2 gal home depot bucket, 1/2″ pvc, an ac infinity 230 gph pump and 6 spray emitter getting 2 more emitters to even out the spray. This has been running with a little bit of clonex and distilled tap water for ten days now and the cuttings haven’t…
1
-
-
Heres my growdots and recharge grow. I have 3 Banana Coffee and 2 Fruit Tella in 3 gals grown in happyfrog under a Philizon 1000 watt LED. They are in a 2x2x3 with a 195cfm exhaust fan in top right corner and a small ocillating fan pointing down a lil on the canopy.The canopy is currently 20 inches high as they have been LST’ed . Right now…
-
Holy shnikeys that tent is full already. Looking good.
1- View 1 reply
-
-
vancerefridgeration and eazeandlax
-
Dude posted an update 6 months ago
-
My eyes look like that cause I’m inhaling! Lol
-
Haha get you some!
-
It took me a minute to figure out how to get on the new app but my old ass is here lmao .i have a Sherlock Holmes pipe I haven’t used in yrs .
-
How do you clean the pipe? Does the stem detach from the bowl?
- View 6 replies
-
That’s what I used to do was just twist the pipe cleaners together, I used to soak some of my pipe cleaners in acetone and run them thru…… it worked really well but made sure to clean it out really well and dry afterwards.
1
-
-
Water more or water more often
A healthy rhizosphere requires dissolved oxygen (O2) as well as moisture (H2O). Water is not able to hold as much oxygen as the air, so roots can consume the available oxygen in the water to the point where roots start to ‘suffocate’ pretty quick. There is really no such thing as over-watering. Roots can live submerged as long as O2 levels…
theunclekush, paka and 3 others - Load More